 |
Products |
Category |
Summary |
 |
|
Ceramic | Labeling,Packaging,Part Markings,Part Number | KEMET Ceramic P/N Suffixes - Marking & Packaging |
|
|
Aluminum
Ceramic
Tantalum | Capacitor Selection,Aluminum vs Ceramic vs Tantalum | How do I choose between a polymer aluminum, ceramic and tantalum capacitor? |
|
|
Ceramic | Cracking,Failure Modes,Leakage,Reliability | Re: What are the typical failure modes of ceramic capacitors? |
|
|
Tantalum | Product Offerings | What series of Tantalum Capacitors do you manufacture? |
|
|
Ceramic
Tantalum | Failure | What are the typical failure modes of your military capacitors? Can they ignite or burn? |
|
|
Ceramic | High Frequency Performance,S-Parameter,SPICE,Resonance | Comparison of simple series RLC model with complex SPICE models |
|
|
Ceramic
Tantalum | High Frequency Performance | What is the high frequency impedance, equivalent series resistance, or capacitance? How about ripple current capabilities? |
|
|
Ceramic | Aging | What is "aging?" |
|
|
Tantalum | Aluminum vs Ceramic vs Tantalum,KEMET Part Number,Part Number | What is a wet tantalum capacitor? |
|
|
Ceramic | Failure Modes | What are the typical failure modes of ceramic capacitors? |
|
|
Ceramic | Dielectric Absorption | Dielectric properties? |
|
|
Ceramic | Capacitor Selection | What is the difference between military BX & BR, and how does it compare with commercial X7R, & X5R? How about military BP, as compared to commercial C0G, C0H, & C0K? |
|
|
Ceramic | EIA Designations | What do all the EIA letters stand for, such as X7R, etc? |
|
|
Ceramic | Reliability | What is the typical reliability of a ceramic chip capacitor? |
|
|
Ceramic | Piezoelectric Effect | Are your military ceramic capacitors subject to the piezoelectric effect? |
|
|
Ceramic | Cracking,Flex Robustness,Failure | Flex - How much is allowed? |
|
|
Ceramic
Tantalum | Reliability | How can I calculate reliability for differing conditions of temperature and voltage? |
|
|
Tantalum | Packaging | How do you package Tantalum Capacitors? |
|
|
Tantalum | Capacitor Selection | What are the advantages of a wet tantalum capacitor? |
|
|
Ceramic | Packaging | How do you package ceramic chips for SMT? |
|
|
Tantalum | Capacitor Selection,Product Offerings,Rated Voltage vs Temperature | What are the applications for wet tantalum capacitors? |
|
|
Ceramic
Tantalum | Capacitor Selection | What are the most significant differences in tantalum and ceramic capacitors for a given application? |
|
|
Ceramic | EIA Designations | What do all the EIA letters stand for, such as X7R, etc? |
|
|
Tantalum | Materials,Product Offerings | What is the Moisture Sensitivity Level (MSL) of your military / Ta surface mount COTS products? |
|
|
Aluminum
Ceramic
Tantalum | Military Qualification | Where can I find information on KEMET's Military Qualification Approvals? |
|
|
Ceramic
Tantalum | Aging | Do your military capacitors exhibit “aging”? If so, how is it quantized? |
|
|
Ceramic | Product Offerings | For KEMET's high voltage MLCC's, what is the ultimate voltage breakdown UVBD per voltage rating? |
|
|
Aluminum
Ceramic
Tantalum | Capacitance Conversion,Cap Code | Define your Cap Code? What is the conversion formula for capacitance - picofarads to nanofarads to microfarads? |
|
|
Ceramic | Rated Voltage vs Temperature,Derating | Do ceramic capacitors require derating of DC Voltage vs Temperature? |
|
|
Ceramic | Soldering,Thermal Info | What temperature profiles for soldering can your military ceramic products withstand? |
|
|
Ceramic
Tantalum | Product Offerings | How can I determine the high frequency performance (capacitance, ESR, ESL, resonant frequency) of your military products? |
|
|
Tantalum | Part Markings | What do the markings on your part mean? |
|
|
Ceramic | Derating | Should I derate the DC voltage for ceramic capacitors, as I do for tantalums? |
|
|
Ceramic | Capacitance Adjustment,Flex Robustness,Product Offerings | How do the Voltage coefficient of capacitance, Impedance curves, Q factor, Flex robustness for high volt MLCC compare to standard MLCC by dielectric? |
|
|
Ceramic | Product Offerings | Will there be an AEC-Q200 qualification for the high voltage MLCC products? |
|
|
Tantalum | KEMET Part Number,Part Number | What does “COTS” mean? |
|
|
Ceramic | Aging | What are the aging rates for KEMET's high voltage MLCC products? |
|
|
Tantalum | Materials,Product Offerings | What type of seal does KEMET use for wet tantalums? |
|
|
Ceramic | KEMET Part Number,Product Offerings | What parts are included in the Sierra-KD acquisition? |
|
|
Tantalum | Operating Temperature Ranges | What is the operating temperature of KEMET's wet tantalum capacitor's? |
|
|
Ceramic
Tantalum | Competitive Cross Reference | How can I determine the KEMET part number if all I have is a competitor's part number? |
|
|
Tantalum | Product Offerings | Does KEMET offer commercial and military products for wet tantalums? |
|
|
Ceramic | Dielectric Absorption | Dielectric absorption of C0G/NP0 ceramic? |
|
|
Ceramic | Environmental Impact,Product Offerings | Is the high voltage MLCC product lead-free, RoHS compliant? |
|
|
Ceramic | Cap Code,Capacitor Selection | How do you define the capacitance range per dielectric? |
|
|
Ceramic | KEMET Part Number,Part Number | Will the part number change or will the WilsonGreatbatch part numbers be used for Sierra-KD? |
|
|
Ceramic | Failure Modes | Ceramic failures |
|
|
Ceramic | Thermal Info | Thermal Info |
|
|
Aluminum | Ripple Current | What is the relationship between ESR and ripple current and why is ripple current important to the circuit designer? |
|
|
Tantalum | Leakage,Operating Temperature Ranges | What happens to the DC Leakage over the T525's operating temperature range (-55 to +125 degree C)? |
|
|
Tantalum | Product Offerings | Does KEMET manufacture a silver case wet tantalum? |
|
|
Ceramic | KEMET Part Number,Product Offerings | Where will the Sierra-KD products be manufactured? |
|
|
Ceramic
Tantalum | Soldering | Can your military products be used in Pb-free soldering profiles? |
|
|
Ceramic | Part Number,Product Offerings | What is the electrostatic dissipation capability of your ceramic products? |
|
|
Ceramic | Product Offerings | What are the special features of this High Voltage Surface Mount chip? |
|
|
Ceramic | Military Qualification,Product Offerings | What Military Certifications are associated with the Sierra-KD products and when will they be in place? |
|
|
Ceramic | Product Offerings | Why is this high voltage MLCC product line being offered by KEMET ? |
|
|
Ceramic | Product Offerings | What other names might we seen associated with Sierra-KD products in the past? |
|
|
Ceramic | Product Offerings,Terminations | What is the lead wire material and finish on leaded military ceramic capacitors? |
|
|
Tantalum | Shelf Life | What is the shelf life of a Tantalum Capacitor? |
|
|
Tantalum | Product Offerings | What is the difference between MIL-PRF-55365 and KEMET's T493 product? |
|
|
Ceramic
Tantalum | Environmental Impact,Product Offerings | Do your military products contain any of the Restriction of Hazardous Substances (RoHS) materials, including Cd, Pb, brominated flame retardants, etc.? |
|
|
Ceramic | Product Offerings | What is the Moisture Sensitivity Level (MSL) of your military ceramic products? |
|
|
Ceramic | Materials,Product Offerings | Are military ceramics made with Base Metal Electrodes (BME)? |
|
|
Ceramic | Product Offerings | Why do we consider high voltage MLCC's high voltage? |
|
|
Ceramic | Product Offerings | What is the difference between MIL-PRF-123 & MIL-PRF-55681 |
|
|
Tantalum | Product Offerings | How can I identify RoHS-compliant tantalum leaded products? |
|
|
Tantalum | KEMET Part Number | How do I order the different options available with the T493 product |
|
|
Ceramic | Soldering | Are tin whiskers a concern for your ceramic military products? |
|
|
Ceramic | Capacitor Selection | Military Designation (cdr31) |
|
|
Ceramic | Capacitor Selection,Product Offerings,Reliability | Can I substitute higher voltage and tighter tolerance ceramic capacitors in an application? |
|
|
Ceramic | Product Offerings | Has this high voltage MLCC product line been qualified? |
|
|
Tantalum | Product Offerings | What ESR level does the E-spec for the T495 part type translate to - how do I read the E-spec? |
|
|
Tantalum | Part Number,Product Offerings | What is the difference between Military and Military COTS T493 tantalum SMD's? |
|
|
Ceramic | Product Offerings | What are KEMET’s long term plans for the Sierra-KD line? |
|
|
Ceramic | Soldering,Terminations | What is the internal solder used in your leaded military ceramic products? |
|
|
Ceramic | Product Offerings | Are the high voltage MLCC parts 100% DWV tested, at the following criteria 1.5 Vr below 1 kV, 1.2Vr > 1 kV ? |
|
|
Ceramic | Product Offerings | What are the markets for this high voltage series? |
|
|
Ceramic | Piezoelectric Effect | Piezoelectric Effect in Ceramic Chip Capacitors - What is It? |
|
|
Tantalum | Product Offerings | Are there any manufacturing differences in the T520 and T525? |
|
|
Ceramic | Materials,Product Offerings | What is the “low voltage failure mode” and does it apply to military ceramics? |
|
|
Ceramic | Product Offerings | Where are your military ceramic capacitors manufactured? |
|
|
Ceramic | Dielectric Absorption | Do your military ceramic capacitors exhibit “dielectric absorption”? |
|
|
Ceramic | Terminations | What are the termination types on military ceramic chips? |
|
|
Tantalum | Materials | What does "free of brominated flame retardants" mean? |
|
|
Tantalum | Product Offerings | What does “COTS” mean? |
|
|
Ceramic | Capacitor Selection |
What is the difference between military and commercial ceramic capacitors?
|
|
|
Ceramic | Product Offerings | How do I place all new orders for Sierra-KD? |
|
|
Tantalum | Part Number | Where are your Ta surface mount Military COTS T493 series capacitors manufactured? |
|
|
Tantalum | KEMET Part Number | Is there a problem with tin whiskers on the Ta surface mount Military COTS T493 product? |
|
|
Tantalum | Competitive Cross Reference | Is there a second source for the T525? |
|
|
Ceramic
Tantalum | Capacitor Selection | Can I order specially-screened military products? If so, why can’t I get “special” parts JAN branded? |
|
|
Ceramic | Product Offerings | What are the lead times for the Sierra-KD products? |
|
|
Tantalum | Packaging | What are the packaging specifications for the T525 series? |
|
|
Tantalum | Terminations | What is lead frame material used on the T525? |
|
|
Tantalum | Terminations | What are the available termination types on the Ta surface mount Military COTS T493 series? |
|
|
Tantalum | Capacitor Selection | What capacitance tolerances are offered for the T525? |
|
|
Tantalum | KEMET Part Number | Can I order specially-screened military products? If so, why can’t I get “special” parts JAN branded? |
|
|
Ceramic | Leakage | How can I calculate DC leakage limits for your military ceramic products? |
|
|
Ceramic | Flammability | What is the flammability rating of your military ceramic capacitors? |
|
|
(Results @ERROR-@ERROR of 389)
|
CONTACT US | CUSTOMER SERVICE
